Download Troubleshooting Chart, continued

Operator's Guide
1-5
The next TOF should be four in. (8 sprocket holes) past the printer’s paper
exit, as shown in the following illustration. (When the printer begins to
print, it backs the paper up to print on this TOF.)
If the top of form must be reset, you can reload paper, as described in
Loading Paper, in Section 2.
PB0-N
E
If Applicable, Check That Stacker is Ready.
F
Send Your Print File
Make sure the READY and ON LINE lights (Pages 1-7 and 1-10) are lit
and the operator access top cover and front door are closed, and then send
a print file from the host computer to the printer:
•
If the printer displays an error or attendance message on the control
panel, see Printer Messages in the troubleshooting chart in Section 7.