Download "user manual"

JEMWare Meter Configuration Software
Get Meter Time
This menu item will read the clock time from the meter and display it on the PC. It will
not change the time, nor can it be edited from this screen. To change the time, go to the
Set Meter Time menu.
Activate Cellular Modem
This will turn on the cellular modem
Get Cellular Modem Info
This will retrieve information about the cellular modem:
Signal strength
Registration Status
IP Address
Phone No
ESN
Carrier ID
Firmware Version
Freeze
Click this menu choice to perform a register freeze.
Health Check
This feature will read and display the meter‘s Health Status and Threshold Alarms from
the connected meter. Also the Phase A, B, and C Potential Annunciators are reported.
107