Download User Manual - ETB Instruments

DigiDash2 Manual
© ETB Instruments LTD 2005
3.3.1 LCD Display Screens in Detail
OILP : Oil Pressure in PSI (or BAR)
OILT : Oil Temperature in °C (or °F)
Water: Water Temperature in °C (or °F)
Odo : Vehicle Odometer (Total)
Bat : Battery Voltage
Fuel : Fuel Level as a percentage of full
RPM : Engine revolutions per minute
MPH : Miles per hour (KMH = Kilometres per hour)
Gear : Engaged Gear (‘N’ for neutral, ‘C’ for clutch-down)
Engine : Elapsed Engine Run Time
Aux Psi : Auxiliary Pressure in PSI
Lst : Last lap number and time
Bst : Best lap number and time
L: Lap Number you are on
T: Lap Elapsed Time
S: Current split sector you are in (+ or – sector time from Best Lap)
Accel : Start & Stop Speed (e.g. 0 – 60) (Decel = Deceleration timer)
Time : Time Recorded
Power : Instantaneous Estimate of Engine brake horse power (BHP)
Max : Maximum recorded BHP Estimate
G Turn : Lateral G-Force (+/– Indicates Left / Right Turn)
G Accel: Longitudinal G-Force (+/– indicates Acceleration / Braking)
TrTime : Elapsed Trip Time since last engine start (since last Manual Reset)
TrDist : Trip Distance
Max OP : Maximum Oil Pressure recorded (since last reset)
Max OT : Maximum Oil Temperature recorded
Max WT : Maximum Water (Coolant)Temperature recorded
Max DC : Maximum Battery Voltage recorded
Max RPM : Maximum RPM recorded
Max MPH : Maximum Speed recorded
Max Turn : Maximum Lateral G-force recorded
Max OT : Maximum Longitudinal G-force recorded
Version: 1.01
Page 25