Download User Manual - ETB Instruments

DigiDash2 Manual
© ETB Instruments LTD 2005
1.1.2 Datalogger Rear View
1
2
1. POWER/TRIGGER Port
Inputs to this connector include 12v supply, Ground, Speed, RPM and for a stand-alone ON/OFF
switch for Logging data.
2. SENSORS Port
All major sensors and other logged inputs are connected to this port.
1.2 Display Key Features
The DigiDash2 has multi-purpose displays to show a variety of vehicle parameters.
The displays include:
•
•
•
•
•
•
•
•
•
•
•
Engine Revs (RPM);
Sequential gear shift-up lights;
Speed (MPH or KMH);
Gear;
2 axis G-Sensor
Water Temperature in °C/°F
Oil Pressure in PSI/BAR
Auxiliary Pressure (Can be used for
Fuel or Boost Pressure)
Oil Temperature in °C;°F
Fuel Level;
Battery Voltage;
•
•
•
•
•
•
•
•
Power (BHP)
Lap Times;
Acceleration/Deceleration Time;
Trip Time and Distance Display;
Engine Hours
Max Holds on all Key Parameters;
Odometer;
Alarms for 2 Pressures, Oil
Temperature, Water Temperature
and Fuel Level.
The DigiDash also integrates 6 Warning Lights, of which the Auxiliary (AUX) warning light can be
configured using the software to display one of 3 different functions:•
•
•
•
•
•
Main Beam;
Fog Lights;
Direction Indicator;
Ignition/Low Battery;
Brake Fail / Handbrake on Warning;
Auxiliary
- Over Speed Warning
- Logger On / Off
- Neutral Gear (for bike-engined vehicles)
Version: 1.01
Page 6