Download 2N SmartCOM User Manual

Supported Commands
8.2
at+gmm
Enter the command to display the device model – 2N® SmartCOM AT API.
at+gmr
Enter the command to display the current default FW version: x.x.x.x.x
at+gsn
Enter the command to display the GSM module IMEI.
atz
Enter the command to log out the current user and terminate the TCP
connection.
Server Settings
at^sccfg?
Enter the command to read out and display the current server settings.
o
^SCCFG: "LISTEN PORT",50505
o
^SCCFG: "HTTP PORT",93
o
^SCCFG: "HTTP ENABLED",1
o
^SCCFG: "AT API PORT",1562
o
^SCCFG: "AT API ENABLED",1
o
^SCCFG: "LOG LEVEL",3
o
^SCCFG: "MAX USER TCP CONNECTIONS",100
o
^SCCFG: "MAX TERMINAL TCP CONNECTIONS",100
o
^SCCFG: "KEEPALIVE TIMEOUT",60
o
^SCCFG: "KEEPALIVE SENDING PERIOD",180
o
^SCCFG: "TERMINAL FW URL","http://$(SERVER_IP):93/firmwares/1.4.0.4.2.bin"
at^sccfg=”listen_port”,1560
Enter the command to set the server listening port to 1560.
at^sccfg=”http_port”,8080
Enter the command to set the web server http port to 8080.
at^sccfg=”http_enabled”,1
Enter the command to enable/disable the use of the http interface: 0 –
disabled, 1 – enabled.
at^sccfg=”at_port”,1562
Enter the command to set the AT API port to 1562.
at^sccfg=”server_restart”
Enter the command to restart the 2N® SmartCOM Server.
78