Download phoenix rm

INSTRUCTIONS FOR USE
12.6 Creating new AV pairs
You cannot always rely on the pairs chosen automatically by the software, especially if the image is of poor
quality.
However, you can choose new pairs among those listed by the software as potential hits, as described in
section 2.4.
Otherwise, you can use the add manually mode by clicking on the icon
at the top right:
Figure 2-11: Vessel hotspot in add manually mode
The yellow points are hot-spots, i.e. points of the image in which the system has identified potential vessels
for use in creating new pairs.
Click on a hot-spot to select a vessel. Click on the second vessel of the pair to complete and confirm the pair
automatically:
IT
62