Download M M2 3D Printer V4

Contents
2
3
4
6
7
9
10
11
12
Important Safeguards
Welcome
M2 Features
Other products included with your printer
Set up
Slicing .STL or .OBJ files
Maintenance and Support
Warranty
About MakerGear
Important Safeguards
1. READ ALL INSTRUCTIONS.
2. To protect against electrical shock, do not put the
machine body, cord or electrical plug of this
printer in water or other liquid. If printer falls into
liquid, unplug the unit first, then remove printer
immediately. Do not reach into the liquid without
unplugging the unit first.
3. This machine should not be used by children. To
avoid possible accidental injury, close supervision
is necessary when unit is used by or near
children.
4. Unplug from outlet when not in use. To unplug,
grasp plug and pull from electrical outlet. Never
pull cord.
5. Avoid contacting moving parts.
6. During operation keep hands, hair, and clothing
away from attachments of printer to reduce risk of
injury to persons, and/or damage the unit.
7. Do not operate unit with a damaged cord or plug,
or after the unit has malfunctioned or has been
dropped or damaged in any way or is not
operating properly.
2