Download PDF - FLIR Systems

ThermaCAM Researcher 2001 Operating Manual
This dialog has two shapes, depending on the camera used. They are functionally
the same.
Recordings are controlled by three conditions: Start, Record and Stop. In this
dialogue you can set these conditions as well as the base part (Auto name) of the
file names and the directory where the recording shall be made. If you select the
Sequence file option, images will be recorded to a single file, which will reduce the
number of files to handle and increase the recording speed. The dotted button
beside the current directory field leads to a directory browser.
Sequence recordings can start at:
• Tool button
• At key trig F5
• At HH:MM:SS. Fill in a time within the next 24 hours like this: “11:23:45”
• External trig (plus a specified delay: for instance “00:00:05”)
Images can be stored either:
• At highest possible speed. This means that no images will be displayed during
the recording, unless you select the Enable Image Presentation option. That
will however reduce the recording speed.
• At HH:MM:SS interval. Example: “00:05:30”
• At key trig F5. This choice will disable the start or stop conditions
• Every N:th image
66