Download User Manual

MorphoManager User Manual
Panel Feedback No
Response Timeout:
This value will determine the length of response time allowed from the
Access Control Panel.
Relay Enabled:
Each Biometric Device has an on board relay that can be used to control
an external device on successful presentation of a fingerprint. Use this
option to activate the relay when a user is authenticated.
Relay Duration:
If the relay is activated, this value will determine the length of activation
time.
Push To Exit Enabled:
This allows the Access Panel to open a door even though the user is not
identified on device.
Push to Exit Duration:
This sets the length of time the door will remain open if Push to Exit is
enabled.
This determines whether the use of Wiegand for duress finger is Disabled,
Reversed, or Custom.
Duress Wiegand Mode:
Durress Wiegand Profile:
If the Durress Wiegand Mode is Custom, this will set the Wiegand Profile
to be used during presentation of a duress finger.
Screen 5 – Function Key Mode for MA 100, J, 500, and VP Family
Enable MA 500
Multi-database Mode:
This will allow you to enable the Multi-database mode on this family of
devices if they have the proper license installed.
© Refer to End User License Agreement for Copyright Notice
Page 27