Download TruSpeed DC Manual - Tele

Transcript
Section 1 - Getting Started
Unpacking Your TruSpeed DC
When you receive your TruSpeed DC (Data Collection) laser, check to make sure that you
have received everything that you ordered, and that it all arrived undamaged.
If the laser is to be used in the United Kingdom as a stand alone hand held device a basic
package will contain the following:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
A hard carry case with foam interior.
A TruSpeed DC (Data Collection) laser Instrument.
Two C-cell batteries.
Anti jammer software installed.
A shoulder stock.
TruSpeed DC tripod yoke.
Sighting scope magnifier.
TruSpeed DC User manual.
TruLogger Software package.
Serial Port leads.
TruLogger Software
The TruLogger software runs on any Microsoft operating system computer and allows you
to easily transfer, review and archive the speed measurement data stored in the TruSpeed
DC’s internal memory. It is also used to set the time and date within the device.
In order to connect to the computer you will need to attach the LTI 4-pin to DB9 download
cable to the serial port on the rear of the laser.
The following software and hardware components also need to be present:
•
•
•
Operating System: Microsoft Windows 2000, Microsoft Windows XP or Microsoft
Windows Vista.
CD ROM drive.
Serial Port or USB port with a Serial Adapter.
See Section 5 Serial Data interface for installation instructions.
2
© Tele-Traffic UK Ltd 2010