Download Programmable Automation Controller

n PROGRAMMABLE AUTOMATION CONTROLLER / PAC
iQ Platform CC-Link IE Field Control and Remote I/O Network Module
CC-Link IE Field brings 1 Gigabit speed for cyclic, acyclic and transient data transmission to RJ45 and Cat 5e cabling
infrastructure. Create mixtures of line and star topology, and maintain control over up to 120 controller or remote I/O
stations simultaneously on the same network.
Model Number
Stocked Item
Certification
Network Common Memory
Transient Transmission Capacity
Communication Speed
Connection Cable
Maximum Station-toStation Distance
Ethernet
Total Distance
Number of Cascade
Connections
Transmission Path
Master Station
Number of Connected
Stations in One
Local Station
Network
Maximum Number of Networks
Communication Method
Number of Occupied I/O Points
Internal Current Consumption (5VDC)
Weight (kg)
Base Unit Slots Occupied
QJ71GF11-T2 (*1)
S
UL • cUL • CE
32k bytes
2048 bytes
1Gbps
An Ethernet cable that meets the 1000BASE-T standard (Category 5e or higher, shielded RJ45)
100m max. (Compliant with ANSI/TIA/EIA-568-B (Category 5e))
Line topology: 12000m (when connected to 1 master station and 120 slave stations)
Star topology: Depends on the system configuration
Up to 20
Line topology, star topology, ring topology and mix of both line topology and star topology is possible
1 station
120 stations (Local station or Remote I/O) (*2)
239
Token passing method
32 points (I/O assignment: Intelligent 32 points)
0.85A
0.18
1
Notes:
1. Must be used with QnU Universal CPUs with Serial Numbers starting with ‘12012’ or higher.
2. For CC-Link IE Field Remote I/O stations, refer to the LJ72GF15-T2 CC-Link IE Field Slave Head station.
MELSEC Q Series / iQ MELSECNET/H Control Level Master/Local Network Modules
Use MELSECNET/H to link Q Series systems together on a control level network for the coordinated operation of
multiple controllers on a production line or large machine. MELSECNET/H also supports the direct connection
of PCs onto the network for SCADA or maintenance applications. MELSECNET/H was designed to offer similar
performance benefits to most industrial Ethernet systems, while offering the high degree of performance
required in an automation environment.
Key Features:
• MELSECNET/H configuration and maintenance is supported by GX Works2 with no need for
accessory plug-ins
• High-speed communications at up to 25Mbit/s (depending on modules used)
• Backwards compatible with existing MELSECNET/10 installations
• Guaranteed determinism via token passing scheme
• Scalable to exceed the needs of the largest installations (over 15,000 stations in one system)
• Up to 30km loop circumference via fiber connections
• Loop topology optical fiber media offers maximum speed and dual redundancy
• Single bus coax offers many performance benefits with economical media
• No programming required to establish cyclic network communications; just set parameters in GX Works2
• Transient communications permit asynchronous peer to peer messaging
• Loop topology offers recovery from media breaks via automatic loop back
• Floating master maintains network operation by allowing any station to take over after the original master
goes offline
• Offline stations return to the network automatically when able
• Extensive diagnostic functions to monitor network operation and status
• Program & monitor across the network
• Transmit up to 35 kbytes of uninterrupted data for increased performance and simpler programming
(S/N 06092x, Version D units or later)
62