Download 1 ChemFlux Tutorial Manual

Transcript
ChemFlux Tutorial Manual
7
of
40
transport model.
Model Description
Figure 1 - 2D example, model dimensions
Material Properties
Material Properties used for the SVFLUX steady-state model are as follows:
k sat = 158 m/yr
k y-ratio = 1.0
Volumetric water content = 0.35
ksat = 3156 m/yr
k y-ratio = 1.0
Volumetric water content = 0.35
The soil-water characteristic curve data was used for both materials in the model.
Table 1
Soil Suction (kPa)
0.0001
100
1000
Volumetric Water Content Ratio
0.351
0.35
0.349
NOTE:
Steady-state seepage solutions do not require that the soil-water characteristic curves have an initial
positive slope. An initial positive slope is only required in transient models where water storage will
change with time. The initial positive slope on the SWCC applies for the low suction range.