Download Medium Voltage SMC-Flex™ Motor Controller

Communications
8-3
The control panel provides the operator inteface to the controller.
I
Start
The green start button, when pressed, will begin
motor operation. (Proper setup of the HIM port is
required.
O
Stop
The red stop button, when pressed, will halt motor
operation and/or reset a fault.
Jog
Jog
The jog button is active only when a control option
is present. Pressing the jog button
ATTENTION
The Bulletin 20-HIM interface module's stop push
button is not intended to be used as an emergency stop.
Refer to the applicable standards for emergency stop
requirements.
ATTENTION
The external HIM has a similar programming operation
to the built-in programmer, but note that differences do
exist.
All other controls available with the various human interface modules are
non-functional with the SMC-Flex controller.
1560E-UM050A-EN-P – August 2004