Download TPSB CONTROLLER BOARD USER MANUAL

Transcript
SET HORIZONTAL TAB POSITIONS
Sets up to 32 horizontal tab-position n columns from column one, but does not move the print position. See
the Horizontal Tab command (09).
The tab positions remain unchanged if the character widths are changed after the tabs are set. The command
ends with hexadecimal 00; hexadecimal 1B 44 00 clears all tabs.
ASCII
Hexadecimal
Decimal
Value of n
Value of k
Default
ESC D [n]…k NUL
1B 44 [n]…k NUL
27 68 [n]…k 0
Column number for tab minus one
(n is always less than or equal to the current selected column width)
0-32
Every 8 characters from column. 1 (9, 17, 25, etc.) for normal print
Formulas
Set the tab positions in ascending order and put Hex 00 at the end.
Hex 1B 44 00 (number of tabs not specified) clears all tab positions.
Exceptions
The tabs cannot be set higher than the column width of the current pitch:
1-24= Standard pitch
1-37= Compressed pitch
Example:
1B 44 03 04 07 0A 0D 18 00
09 41 09 42 09 43 09 44 09 45 09 46 0A
To obtain (in standard pitch):
---A---B--C--D----------EF
TPSB controller board User’s Manual
Page 21 / 59
FDE 31 08 398 Issue Z