Download Codian MCU 4200 User Guide

Codian MCU 4200 Series User Manual
Version 1.3(1) December 2005
Link status
Indicates whether this Ethernet port is
connected to or disconnected from the network.
Speed
Shows the speed (10/100/1000 Mbit/s) of the
network connection to the MCU on this port.
This value is negotiated with the device to which
this port is connected or based on your manual
configuration, depending on the settings you
chose above.
Duplex
Shows the duplex mode (full/half duplex) of the
network connection to this port.
This value is negotiated with the device to which
this port is connected or based on your manual
configuration, depending on the settings you
chose above.
MAC address
Shows the fixed hardware MAC (Medium Access
Control) address of this port.
This value cannot be changed and is for
information only.
Packets sent
Displays a count of the total number of packets
sent from this port by the MCU. This includes all
TCP and UDP traffic.
When troubleshooting connectivity issues, this
information can help you confirm that the unit is
transmitting packets into the network.
Packets
received
Displays a count of the total number of packets
received by this port of the MCU. This includes
all TCP and UDP traffic.
When troubleshooting connectivity issues, this
information can help you confirm that the unit is
receiving packets from the network.
Multicast
packets sent
These fields display further statistics for this port.
Use these fields for advanced network
diagnostics, such as resolution of problems with
Ethernet link speed and duplex negotiation.
Multicast
packets
received
Total bytes
sent
Total bytes
received
Receive
queue drops
Collisions
Transmit
errors
Receive
errors
Related Topics
●
Configuring IP Routing settings
●
Upgrading the Firmware
Copyright (c) Codian Ltd, 2003 - 2005
Page 67 of 108