Download User Manual - D-Link
Transcript
3.10. DNS Chapter 3. Fundamentals Note: A high rate of server queries can cause problems Dynamic DNS services are often sensitive to repeated logon attempts over short periods of time and may blacklist source IP addresses that are sending excessive requests. It is therefore not advisable to query these servers too often, otherwise they may cease to respond. A repost for an individual server can be forced with the command: gw-world:/> httpposter -repost=<index> Where <index> is the position of the object in the list of posters. For example, to force a report of the second in the list: gw-world:/> httpposter -repost=2 HTTP Poster Has Other Uses HTTP Poster may be used for other purposes than dynamic DNS. Any requirement for NetDefendOS to send an HTTP GET or POST message to a particular URL could be met using this feature. 165
Related documents
User Manual - D-Link
User Manual - D-Link
D-Link DFL-2560G Network Security UTM Firewall
User Manual - D-Link
D-Link DFL-200 User's Manual
User Manual - To Parent Directory
Use of IEEE P802.17 Draft Contribution Templates Draft 0.40:85
- D-Link
"user manual"
DFL - D-Link
DES-3028/52 Series Firmware Release Notes - D-Link
DES-3028/52 Series Firmware Release Notes - D-Link