Download User Manual - Schneider

Table of Contents
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
About the Book. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Part I Introduction to Modicon M580 Change
Configuration On The Fly . . . . . . . . . . . . . . . . . . .
Chapter 1 Modicon M580 CCOTF Presentation. . . . . . . . . . . . . . .
What is CCOTF? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
General Advise for Using CCOTF . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Allowed CCOTF Modifications in Modicon M580 . . . . . . . . . . . . . . . .
Which Parameters Can be Changed with CCOTF? . . . . . . . . . . . . . .
CCOTF Counting and Status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 2 CCOTF Prerequisites . . . . . . . . . . . . . . . . . . . . . . . . . . .
Modicon M580 Hardware Compatibility with CCOTF . . . . . . . . . . . . .
Modicon M580 Settings for CCOTF . . . . . . . . . . . . . . . . . . . . . . . . . .
Part II How to Perform a CCOTF Modification . . . . . . . .
Chapter 3 Adding a Remote I/O Drop. . . . . . . . . . . . . . . . . . . . . . .
Adding a Remote I/O Drop Using the Standard Connected Mode . . .
Adding a Remote I/O Drop Using the Virtual Connected Mode . . . . .
Chapter 4 Adding/Deleting Modules . . . . . . . . . . . . . . . . . . . . . . .
Adding/Deleting a Module Using the Standard Connected Mode . . . .
Adding/Deleting a Module Using the Virtual Connected Mode . . . . . .
Chapter 5 Modifying Module Parameters . . . . . . . . . . . . . . . . . . .
Modifying Module Parameters Using the Standard Connected Mode.
Modifying Module Parameters Using the Virtual Connected Mode . . .
Glossary
EIO0000001590 10/2014
.........................................
5
9
13
15
16
17
19
21
23
25
26
27
29
31
32
34
37
38
41
43
44
45
47
3