Download User Manual - SAMWONTECH

SAMWONTECH
4.4.4.2 Reading a Program Pattern
▶ The following order should be performed to read the program pattern which is set up at TEMP880S.
1
○
2
○
3
○
4
○
Set up the Pattern No. of Program at D1000
Set up the READ TRIGGER (‘2’) at D1003
Wait until it’s DONE(‘1’) after reading the data of D1004
Read data recorded at D1010~D1032.
4.4.4.3 Writing the Program Pattern
▶ The following order should be done to write program pattern at TEMP880S.
1
○
2
○
3
○
4
○
Set up the program pattern at D1000
Set up data to record at D1010~D1031
Set up the WRITE TRIGGER ('3') at D1003
Wait until it’s DONE (‘1) after reading the data of D1004
4.4.4.4 Copy/Delete of Pattern & Insert/Delete of Segment
▶ Copy of Program Pattern
1
○
2
○
3
○
4
○
Set up the original pattern No. to copy at D1000
Set up the No. of pattern at D1001 to copy the original pattern
Set up D1003 PT COPY TRIGGER('4') at D1003
Wait until it’s DONE (‘1) after reading the data of D1004
▶ Delete of Program Pattern
1
○
2
○
3
○
Set up the No. of pattern, which will be deleted, atD1000
Set up PT DEL TRIGGER('5') at D1003
Wait until I’t s DONE (‘1) after reading the data of D1004
1st Edition of TEMP880S IM : Sep. 21. 2005
Page 95 / 101