Download "user manual"

Transcript
Smart Remote Controller R-Unit User Manual
6.Setting Example
5.Operating Mode Description
D/N Threshold
D/N Threshold
6.1 Example-1
Sunrise
Sunset
Description
Setting
D2D(Dusk to Dawn mode)
Light On
Smart-DC series
DC CV CC DD
Dusk to Dawn
Light Off
Three Time Night Mode
Time1: 3 hours;
Dim1: 100%
Light On
Light Off
Time1(h)
Time1
Time2
T0T
T0T mode ( can set the load on time
before morning coming )
Light On
Dim1(%)
Time3
Time2: 3 hours;
Dim2: 50%
Time2(h)
Light Off
Dim2(%)
Time3
Time1
5.1 Dusk to Dawn mode(D2D)
On the remote controller, D2D behalf dusk to dawn mode.
Dim3(%)
Time3(h)
*Rotary switch 1
1
Time3: 8 hours;
Dim3: 90%;
Note: If the time exceeds
the total of Time 1-3 at
night, D/N threshold will
be preferred.
Time1(h)
Time1(h)
!Smart constant current controller is set to D2D mode,
corresponding to the Dim1 of a set is still valid, but the time
2 and time 3, and the corresponding Dim2 and Dim3
settings are invalid.
Current: 2.3A
Current1
Current2
5.2 Three-stage Night Mode
5V in 12V system,10V in
24V system
The rotary switch 1-6 is set, the Time and Dim to achieve a
variety of patterns.
* If the time is in the OFF position, the default cancel this time
period.
Initial state
Rotar y switch1~6
D/N threshold
LVD: 11.0V/22.0V
2
1
Time1(h)
Dim1(%)
SOC
Time1(h)
LVD
Dim1(%)
Gel
Batter y type: Liquid
T0T
T0T
3
4
Time2(h)
Dim2(%)
5
6
Time3(h)
Dim3(%)
Liquid
Time2(h)
Dim2(%)
the following illustration:
Threshold
Time3(h)
D/N threshold: 5V/10V
Dim3(%)
5.3 T0T mode ( can set the load on time
before morning coming )
If the time 2 of the R-Unit is rotated to T0T position, this
mode is T0T mode.
The following figure shows the load lit two hours after the
arrival of the dusk, and then turn off (according to halfpower setting determines), the load lit three hours before
the arrival of the dawn.
* This mode can not be set at the time a D2D stalls!
Light on
Light off
T0T
Time1(h)
Time2(h)
Sunrise
Sunset
Time3(h)
Page 4 of 6 pages
3 hours,
100% output
3 hours,
50% output
8 hours,
90% output,
Threshold
priority