1
Download I/O Module Type Building Block User`s Manual
Transcript
3 OUTPUT MODULE SPECIFICATIONS MELSEC-Q 3.7 QY41H Transistor High-speed Output Module (Sink Type) Type Specifications Number of output points Isolation method Rated load voltage Maximum load current Maximum inrush current Leakage current at OFF Maximum voltage drop at ON OFF to ON Response time ON to OFF Surge suppressor Fuse Dielectric withstand voltage Insulation resistance Noise immunity Protection degree Common terminal arrangement Number of occupied I/O points Operation indicator External connections Applicable wire size Applicable connector Applicable connector/terminal block converter module Internal current consumption (5VDC) Weight Transistor high-speed output module (Sink type) QY41H 32 points Photocoupler 5-24VDC (+20/-15%) 0.2A/point, 2A/common 0.7A, 10ms or less 0.1mA or less 0.1VDC (TYP.) 0.1A, 0.2VDC (MAX.) 0.1A 2 s or less 2 s or less (rated load, resistive load) Zener diode None (Attaching a fuse to external wiring is recommended.) 560VAC rms/3 cycles (altitude 2000m) 10MΩ or more by insulation resistance tester By noise simulator of 500Vp-p noise voltage, 1 s noise width and 25 to 60Hz noise frequency First transient noise IEC61000-4-4: 1kV IP2X 32 points/common (common terminal: A01, A02) 32 points (I/O assignment is set as a 32-point output module.) ON indication (LED) 40-pin connector 0.088 to 0.3mm2 (For A6CON1 or A6CON4) 1 A6CON1, A6CON2, A6CON3, A6CON4 (optional) Appearance A6TBXY36, A6TBXY54 370mA (TYP. all points ON) 0.10kg External connection Pin-Outs LED B20 Load Internal circuit LED A05 Load A01,A02 5/24VDC B20 B19 B18 B17 B16 B15 B14 B13 B12 B11 B10 B9 B8 B7 B6 B5 B4 B3 B2 B1 A20 A19 A18 A17 A16 A15 A14 A13 A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A1 Module front view Pin No. Signal No. Pin No. Signal No. B20 B19 Y00 Y01 A20 A19 Y10 Y11 B18 B17 Y02 Y03 A18 A17 Y12 Y13 B16 B15 Y04 Y05 A16 A15 Y14 Y15 B14 B13 Y06 Y07 A14 A13 Y16 Y17 B12 B11 Y08 Y09 A12 A11 Y18 Y19 B10 B09 Y0A Y0B A10 A09 Y1A Y1B B08 B07 Y0C Y0D A08 A07 Y1C Y1D B06 B05 Y0E Y0F A06 A05 Y1E Y1F B04 Vacant A04 Vacant B03 Vacant A03 Vacant B02 Vacant A02 B01 Vacant A01 COM COM 1: When using A6CON2 or A6CON3, refer to Chapter 7. 3-8 3-8
