Download TX-8160

TX-8160_mst.book
42 ページ
２０１５年６月９日　火曜日　午後５時１５分
Troubleshooting
0 When other wireless LAN devices are used near the
unit, several issues such as interrupted playback and
communication may occur. You can avoid these issues
by changing the channel of your Wi-Fi router. For
instructions on changing channels, see the instruction
manual provided with your Wi-Fi router.
Cannot access the Internet radio.
0 Certain network service or contents available through
the unit may not be accessible in case the service
provider terminates its service.
0 Make sure that connecting to Internet from other
components is possible. If connecting is not possible,
turn off all components connected to the network, wait
for a while, and then turn on the components again.
0 If a specific radio station is unavailable for listening,
make sure the registered URL is correct, or whether
the format distributed from the radio station is
supported by this unit.
Bluetooth functions
0 Try plugging/unplugging the power of the unit and try
turning on/off the Bluetooth enabled device. Re-startup
of the Bluetooth enabled device may be effective.
0 When the audio volume of your Bluetooth enabled
device is set low, the playback of audio may be
unavailable. Increase the volume of the Bluetooth
enabled device.
0 Near components such as microwave oven or cordless
phone, which use the radio wave in the 2.4 GHz range,
a radio wave interference may occur, which disables
the use of this unit.
0 If there is a metallic object near the unit, Bluetooth
connection may not be possible as the metal can effect
on the radio wave.
0 Depending on the Bluetooth enabled device, Send/
Receive selector switch may be provided. Select Send
mode.
0 Depending on the characteristics or specifications of
your Bluetooth enabled device, playback on the unit is
not guaranteed.
USB storage device is not displayed.
0 Check whether the USB storage device or USB cable
is correctly inserted to the USB port of the unit.
0 Remove the USB storage device from the receiver
once, and then try re-connecting.
0 USB storage devices with security functions may not
be played.
42
Cannot access the network server.
0 This unit needs to be connected to the same router as
the network server.
0 Make sure your network server has been started up.
0 Make sure your network server is properly connected
to the home network.
0 Make sure your network server is correctly set.
0 Make sure that the router LAN side port is properly
connected to the receiver.
Playback stops while listening to music files on
the network server.
0 Make sure the network server is compatible with this
unit.
0 When the PC is serving as the network server, try
quitting any application software other than the server
software (Windows Media® Player 12 etc.).
0 If the PC is downloading or copying large files, the
playback may be interrupted.
WARNING: If smoke, smell or abnormal noise is
produced by the unit, unplug the power cord from the wall
outlet immediately and contact the dealer or Onkyo
Support.
The unit contains a microcomputer for signal processing
and control functions. In very rare situations, severe
interference, noise from an external source, or static
electricity may cause it to lockup. In the unlikely event
that this should happen, unplug the power cord, wait at
least 5 seconds, and then plug it again.
Onkyo is not responsible for damages (such as CD rental
fees) due to unsuccessful recordings caused by the unit’s
malfunction. Before you record important data, make sure
that the material will be recorded correctly.