1
Download 10 - Advanced Test Equipment Rentals
Transcript
4. MODIFYING THE MEASUREMENT CONDITIONS 4.8 Changing the Filter If the measured profile is set to R profile or DIN4776, the filter can be switched to either "2RC", "Pc50", or "Pc75". If the measured profile is set to P profile, the SJ-201P automatically selects "No filter". TIP For information about the measured profile and filter definitions, refer to “10.2 Assessed Profile and Applicable Filters”. NOTE If changing the roughness standard, note that the filter is automatically changed according to a selected roughness standard. ■ Display and operation keys Filter setting mode Filter display POWER DATA START STOP CAL STD RANGE CUTOFF ↑ ↓ PARAMETER n ENT REMOTE ← CURVE FILTER TOL / CUST [n/ENT] Key MODE ESC [CURVE/FILTER/TOL/CUST] Key [CUTOFF↑] Key [↓] Key No. 99MBB079A 4 - 15
