Download User Manual - Projector Central
Transcript
01CP-S235-OG-ENG-再校 03.12.25 2:05 PM ページ41 Troubleshooting (continued) Regarding The Indicator Lamps (continued) POWER indicator Lighting or blinking in red LAMP indicator TEMP indicator Description Turned off Blinking in red The cooling fan is not operating. Turn the power OFF and wait at least 20 minutes. After the unit has sufficiently cooled down, please make confirmation of the following item, and then resent the power to ON. • Is there no foreign matter caught in the cooling fan? There is a possibility that the interior portion has become heated. Turn the power OFF and wait at least 20 minutes. After the unit has sufficiently cooled down, please make Lighting or Lighting in confirmation of the following item, and then resent the power blinking in Turned off to ON. red red • Is there blockage of the air passage aperture? • Is the air filter is dirty? • Does the peripheral temperature exceed 35°C? Lighting in green Lighting in green Alternative blinking in the red There is a possibility that the interior portion has become overcooled. Please use the unit within the usage temperature parameters (0°C to 35°C). After the treatment, resent the power to ON. Simultaneous blinking in red It is time to clean the air filter, or there is no air filter. Please immediately turn the power OFF, and clean or change the air filter by referring to the “Air Filter” section of this manual. After you have cleaned or changed the air filter, please be sure to reset the filter timer. After the treatment, resent the power to ON. 41