Download Installation & Operating Instructions

Transcript
Figure 3.5 B shows the parts for the fixed stainless steel handle. (This can be used for aesthetic
purposes when the stove is not alight and not being used).
Part 1.
Handle spindle elbow
Part 2.
Washers, nut and handle catch
Part 3 & 4. Screw and washer for retaining stainless steel handle to spindle elbow.
Part 5.
Stainless steel handle
Assembly:
a) Securely attach the stainless steel handle part 5 to the handle spindle elbow part 1 using the bolt
and washer parts 3 & 4.
b) Pass the handle spindle elbow part 1 through the hole in door, position the washer and door catch
onto spindle and securely tighten using the nut and washer parts 2.
Fig. 3.5 B