Download MMX User Manual

User’s Manual
5. Connect MMXs to network via Ethernet connections by using the NETWORK port on the back panel.
All MMXs should be networked via Ethernet. Otherwise, the MMX system might not work properly.
6. Run the INIT program and connect to the master MMX. Refer to the INIT User’s Manual for details
on the INIT program.
6.1.
Go to the following menus: Remote Setup →
Network → IP Address
Set up the network connection information of a
master MMX and slave MMXs. The MMX IDs of
a master MMX (0) and slave MMXs (1 to 63) set by
using the MMX ID switch on the back panel are
displayed in the list. Settings of a master MMX are
applied to slave MMXs if the option switch setting
and daisy-chain connection are set up properly.
6.2.
Go to the following menus: Remote Setup → Video
→ Main Monitor, Quad Monitor, Spot Monitor
Select a monitor and click the Edit button to set up
layouts. Refer to 4.1 Main Monitor, Configuring
Main Monitor Layout (p. 31) for details on setting
up monitor layout.
7. Run the INIT program and connect to a network keyboard. Refer to the User’s Manual of the network
keyboard for details on setting up the network keyboard.
7.1.
16
Go to the following menus: Remote Setup → Network
→ IP Address
Set up the network keyboard’s network connection
information.