Download EasyView User Manual

Transcript
Checking the “Use the following explicit settings” option allows the maximum and
minimum limits on the Y-axis to be defined manually.
Enter the maximum and minimum values you wish to display in the text fields.
To display a Log scale, check the box.
Note: The software cannot display negative numbers or zero when set to Log scale.
If the “Units of pressure” check box is enabled, the axis will change scale if the pressure units are changed in the
preferences.
By checking the above option, the scale is limited by the maximum limits of the measurements being used.
For example, if the only data to be displayed is mass channels from Barchart1, the limit of the maximum value you can have,
will be the full-scale pressure on Barchart1.
With this option selected, the Y-axis does not have a scale as such. All enabled channels are
given a value of either zero or one and are then plotted against their channel name.
This option is only useful for displaying digital data. In the above example, there are two digital input channels with both
channels configured to “draw stepped”.
MKS Instruments UK Ltd
EasyView Manual v5.7 – SP104022.101 January 2010
66