Download User Manual

Bio-HEPA
Hybrid Air Purifier
MHI-6800
Thank you for using our product.
You have purchased a high-quality
product with one-year free product
warranty. Your satisfaction means
everything to us. We look forward
to serving you at all times. To help
you operate this device, please
read this manual carefully and keep
the warranty card in a proper and
safe place.
KPVGNNKIGPV"CPF"OWNVK/HWPEVKQP
MHI-6800
OCKP"HGCVWTGU
Automatic air quality control through odor and dust sensors
Gigantic plasma dust collector that is easy to clean
Multiple air intake vents effectively in purification coverage
Large flow rapidly purifies indoor air
Five operation modes for easy control
High-performance HEPA filter services for no less than two years
Effective filtration of particulates as small as 0.1~0.3 micron
Excellent dust collection rate of up to 99.97%
Effectively remove dust, odors and smoke
Ensure that all safety precautions are followed when using electrical
appliances for the proper operation of the device.
This instruction booklet describes the safety precautions to be observed
during operation to prevent injuries to yourself ,other persons and damage to the device.
The content not only is suitable for this product but also suitable for
electrical appliances in general.
CAUTION
This machine uses AC 230V/50Hz(Europe) or
AC 100~120V/50~60Hz(USA/Japan). Over
voltage may cause fire hazard or electric shock.
To prevent electric shock,do not dismantle,
repair or modify this product freely.
Maintenance and cleaning shall be
processed as exactly as what instructed
in this manual.In case of malfunction,please
contact the authorized maintenance center.
To prevent fire or electric shock hazard,do not
place the unit in wet places where water may
enter the device.
Do not use fabrics or other materials to cover this
device. Obstructed air inlets and outlets will
result in abnormal operation of this device that
may lead to fire or other accidents.
To prevent interference and distortion, the device
should be placed at least 1 meter away from the
computer, television or radio.
For safety reasons and to prevent fire or electric
shock, unplug the power cord from the electric
casing
ambient
outlet socket under the following conditions:
When you do not use the device for a
long period.
When cleaning, servicing the machine or
during replacement of filter materials.
When you move the device.
power
anthorized
personnel
electric shocks and fire hazards.
Fkhhgtgpv"Rctvu
[ Yjqng"Wpkv"1"Htqpv"Xkgy"]
Air Outlet
Dust Sensor
CLEAN METAL GRID
REPLACE FILTER
RESET
Air Inlets
Air Inlets
Bottom Stand
[ Yjqng"Wpkv"1"Eqpvtqn"Rcpgn ]
Odor Sensor
CLEAN METAL GRID
REPLACE FILTER
RESET
2
Back and Interior View
[ Back View ]
[ Interior View ]
CLEAN METAL GRID
REPLACE FILTER
RESET
CLEAN METAL GRID
REPLACE FILTER
RESET
But the
of the sensor
Control Panel Indicators
from
to turn off
Timer
duration
duration
During cleaning and maintenance,please turn off and disconnect the plug from the power outlet.
is
4
Assemble the
Removing
Removing
Removing
correctly with the
please ensure that the filter is installed
R
from
CLEAN METAL GRID
REPLACE FILTER
RESET
R
to avoid scraping or scratching
the coating on the cover.
Remove UV lamp before cleaning
Use a slightly damp cloth to wipe & clean
Take out
Put back the sensor correctly after cleaning,
make sure that the cord is reconnected in the
correct direction.
C
CLEAN METAL GRID
making sound
Remove
REPLACE FILTER
RESET
If the dirt is hard to remove, pre-soak in diluted detergent and
then use a toothbrush to clean.
be careful
removed or discarded
this would result in
if you want to purchase
cause rusting
ensure that the unit is completely dry
CLEAN METAL GRID
REPLACE FILTER
RESET
Replacing the UV lamp
the
the
not functioning,
Remove
replace with
Carefully
Resetting
please reset
The
being
with the power
pointed
depress
during this resetting operation.
inside the unit.
1.CLEAN METAL GRID Indicator
CLEAN METAL GRID
REPLACE FILTER
CLEAN METAL GRID indicator
RESET
RESET
2.REPLACE FILTER Indicator
REPLACE FILTER Indicator
RESET
CLEAN METAL GRID
REPLACE FILTER
RESET
Sensor
Why
on
sensor
sensor
the source of pollution was created indoor (e.g.smoking).
sensor
Use a
This will
is
not working
Why is the filter not getting rid of dust and odor effectively ?
Please check
have
is
is
Check and make sure that the power cord is securely connected to the power outlet.
Please ensure that the uint has been properly reassembled after cleaning and maintenance.
The unit will not operate if the plasma dust collector or the front cover is not properly
installed.
90
UCNGU"
the unit to a
URGEKHKECVKQPU"
Rated voltage EuropeAC230V/50Hz
Power consumption˖80W
6
Ion output˖ 2x10 /cm
3
Acative oxygen output˖ 0.05ppm
2
UV spectrum˖ 20­
w/cm (at 10cm distance)
Product
Bio-HEPA
Hybrid Air Purifier
70m2-90m2
One year from the
date of purchase
Name &
Add.of
the store
(1) This product passes strict tests prior to leaving the factory. Customers could,within one year
from the date of purchasing, enjoy free repair or replacement of parts if it is checked by our
company that malfunction or damage to the device and/or parts occurred under normal running
condition.
(2) The guarantee does not cover the damages that are attributed to self d i s m a n t l i n g a n d
a s s e m b l i n g , u n a u t h o r i z e d o p e r a t i o n n o t f o u n d i n t h e instructions,random change of
power source and/or voltage, artificial causes and natural disasters.
(3) Date (s) on this guarantee and the purchase invoice will be used to determine the validity of
one year free maintenance.
DISTRIBUTED BY: