Download pro-04 user guide

*** Updates ***:
Please check our website for updates at www.heartcoherence.com/pro04privatedemo or
at the users download and resource page.
*** Help-desk ***:
We are gladly available for telephonic helpdesk service for all issues related to the setup and
operation of the Heart Tuner. Please before calling be sure that you either have some basic
experience in working with Microsoft Windows, or have somebody with you who has. For
questions on the setup and use of the hard- and software, best call Heart Coherence team
++31-53-4361096, Netherlands or email [email protected]; for questions regarding
the use of the Heart Tuner in clinical etc. practice you can call Dan Winter, ++33-468057510,
France or email: [email protected].
The main sections in the manual include:
HARDWARE SETUP AND APPLICATION NOTES GO >
QUICK START GUIDE GO >
STEP-BY-STEP INSTRUCTION GO >
CLINICAL, THERAPEUTICAL AND BIOFEEDBACK PRACTICE (Dan Winter) GO >
TECHNICAL SPECIFICATIONS GO >
HARDWARE SETUP AND APPLICATION NOTES
Hardware setup, operation and shutdown
Be sure to place four well-charged penlite batteries under the back panel of your Heart Tuner
PRO-series unit and carefully watch their proper orientation. After first time plugging in the usb
connector, normally MS Windows will automatically detect new hardware and open the
hardware setup wizard.
The usb driver will normally be found and installed by the wizard. If Windows does not
automatically detect the new hardware (e.g. if this function was switched off in your biossettings), manually run the MS Windows "search new hardware" utility in the control panel. If
Windows can't find the standard driver, you can download it from www.heartcoherence.
com/resource and then select it with the "browse" button in the hardware setup wizard. If the