1
Download NetLD Manual. - Net LineDancer
Transcript
31 CHAPTER 2. NETLD BASICS 2.3 Credentials, Network Groups, Protocols A Credential is the login/security information of each device. You have to give the information to netLD in order to let it access the device. Information can be added in Credentials window, accessible via Inventory → Credentials. Figure 2.3.1: Credentials window. In Credentials window, you should enter all the information needed to access the devices (username, password, SNMP community and etc.). You can leave them blank if certain information is not required, but if there is any lack of credential information, it leads to login failure and every operations fail, e.g. reading and writing information, backup or compare would not be successful. Each Credential contains the following information:
