Download 6500-6.5.19, Pro-Set 700 Co-injection Software, User Manual

Setting up Inputs to the Modules
Setting up Screw RPM
A and B
3–5
Follow this procedure to set up screw RPM A and B.
Important: You can choose either screw RPM and/or cavity
pressure for this input. RPM is the default. For
information on setting up Cavity Pressure screens, refer
to the Pro-Set 700 User Manual, Pub. 6500-6.5.18. For
wiring information, see Chapter 4 of this manual.
1. If you have not already done so, attach the PLC-5 processor to the
operator interface. Refer to the Pro-Set 700 Operator Interface
Installation Manual, pub. 6500-6.2.1.
2. From the Inputs Setup menu, select the Screw RPM B screen.
3. Move the cursor to the appropriate field on the screen .
4. Enter a number between the minimum and maximum in the data
entry box.
5. Press
to confirm your selections.
6. Press
to download your selections to the PLC-5 processor.
Publication 65006.5.19 - January, 1996