Download Manual - Crypto Electronics

Airdata 150 mini USB 11n Wireless Adapter
Tx BURST
Check this box to accelerate the data transmit rate. It may
not work with all wireless access point and wireless
devices.
Beacon(ms)
You can define the time interval that a beacon signal
should be send. Default value is 100. Do not modify this
value unless you know what will be affected.
TX Power
You can select the wireless output power here. Please
select a proper output power setting according to your
actual needs. You may not need 100% of output power if
other wireless clients are not far from you.
Idle Time
Select the idle time for the wireless access point. Default
value is 300. Do not modify this value unless you know
what will be affected.
To save the changes, click the ‘Apply button. Or you can click the ‘Default’ to reset
to factory default values.
61