Download User Manual

Night Mode Function
Patient Home Screen
11 Jan 2010
18:06
The Night Mode function on the Patient Home Screen can be used to
dim disrupting lights from the therapy unit during nighttime therapy
use.
Night Mode
On/Off
Press to activate the Night Mode function from the Patient
Home Screen. A confirmation screen will be displayed
before Night Mode is immediately activated.
Night Mode
When the Night Mode function is active, therapy
continues as normal. The touch screen user interface
will darken and the green Power On/Off button will
dim.
Intermittent 5/2
Therapy ON
125 mmHg
The Night Mode function will deactivate in the event
of an alarm.
Patient Home Screen
11 Jan 2010
18:06
During Night Mode, the screen will illuminate when touched and display
the Patient Home Screen.
Should the touch screen user interface be touched
while night mode is active, the screen will
automatically darken after two minutes of inactivity.
Exit
Night Mode
On/Off
Exit
Night Mode
Press to deactivate the Night Mode function.
Intermittent 5/2
Therapy ON
125 mmHg
15