Download SOLARDRIVE PLUS

SOLARDRIVE
PLUS
INSTALLATION AND
PROGRAMMING GUIDE
Figure 18: Lifting the equipment from underneath
4.3.1.4. Base
To lift the cabinet off the pallet and for final positioning, remove the front and back plates found on the base
so that the forklift tines can be inserted under the cabinet.
After the cabinet has been positioned the openings can be closed off by replacing the plates.
Figure 19: Base with removable plate
Figure 20: Base with the plate removed
4.3.2.
Environmental Requirements for Storage and Transport
Required conditions
Ambient temperature for
storage and transport
-25 °C ÷ +60 °C
Ambient humidity for storage
From 5% – 95%, from 1 g/m – 25 g/m , with no condensation or ice
formation (category 3K3 in compliance with EN 50178).
Ambient humidity during
transport
Maximum 95% up to 60 g/m . Slight condensation may occur when
the equipment is not running (category 2k3 in compliance with EN
50178).
Atmospheric pressure for
storage
86 – 106 kPa (categories 3k3 and 1k4 in compliance with EN 50178).
Atmospheric pressure during
transport
70 – 106 kPa (category 2k3 in compliance with EN 50178).
3
3
3
Table 2: Environmental requirements for storage and transport
37/160