Download Falcon IV - RAID Inc
Transcript
Chapter 1: Introduction hours, there may be a problem with the BBU mod ule. You may reinstall the b attery; and if the battery still sho ws probl ems with charging, co ntact your system vend or for a re placement. While t he battery is being charged, a system event will prompt. You can ch eck battery’ s charge level using a termin al con sole wi th firmware’s embedded utility. 1.2.7 Power Supply Units PN: IFT-9274CPSU The sy stem is eq uipped with thre e (3 ) re dundant, hot-swa ppable, load-sharing 405W PSUs, at the rear se ction of the cha ssis. T he PSU is housed in a 1U canister containing both the power supply and dedicated cooling modules. A single LED indicate s the PSU status. When a power sup ply failure occurs, the L ED lights red. An extr action han dle at the rea r of the PSU is designed to help properly install or remove the module. A scre w hol e on the extra ction h andle helps secure the PSU to t he chassis. The shipping package contains adjustable cable clamps that can be used to secure power cord connections. Figure 1-11: PSU Module Please refer to PSUs. 1.2.8 Appendix A for the technical information of the Cooling Modules PN: IFT-9374CFANMOD Two cooling modules at t he re ar center ventilate t he sy stem. (see Figure 1-12.) The cooling fans ope rate at two (2) fan speeds. When the system operates normally, the cooling fans operate at the lo wer speed. If a system mod ule fails or when one of the tempera ture System Components 1-11