Download geoChart

geoChart User's Manual Erratum
For Commodore 128 Users
geoChart will operate under GEOS 128 as well as versions of GEOS that
run in 64 mode. If you use GEOS 128, switch to 40-column mode before
opening geoChart. geoChart will not operate in 80-column mode.
You can select 40-column mode by using the following procedure:
1:
On the deskTop, select switch 40/80 from the geos menu.
2:
When the screen goes dark, press the RGB button or the composite
switch on your monitor as follows:
•
If you have an RGB button, press this button so that it is in CVBS
mode.
•
If you have a composite switch, press this switch so that it is in
COMPmode.
After you press the RGB button or the composite switch, the screen
will appear in 40-column mode.
Part No.: 14-0303-0111