Download Infinitely Expandable MPDP

Transcript
Infinitely Expandable
OPM-4260 | OPM-4260R
2. How to Install
yy Install this set only at a location where adequate ventilation is available.
How to assemble handles
How to move MPDP
1. 2 people hold each handle on product's back side.
1. Product is packed in a box as shown in Figure 1.
Panel protection
2. Please carefully remove the Packing Bag with a knife or a pair of scissors.
※ Please check front and rear side before you cut the bag to prevent any damages
on panel or set.
Packing Bag
Panel protection
Handles
MPD
P
2. It needs two people to carry or install this product.
[Figure 1]
[Figure 2]
Please hold the handles in the back and the front bottom part at the same time.
- Please do not grab the panel, but grab bottom of master frame when you carry or install the products.
- Please use gloves when you carry or install the products.
3. P
lease assemble handles with the bolts that are in the accessory box to the
rear side as shown in the figure.
Panel protection
Handles
Panel
Master frame
MPDP
[Figure 3]
[Figure 4]
- 14 -
※※Attention :
-Do not remove the panel protection pad until a set is completely installed on a stand or a
wall hanger.
Please carefully remove Panel protection pad to prevent any damages on the product .
-Please make sure to use panel protection when you move, carry or rent MPDP.
- 15 -