Download PPC-CPU852(MS)-512

8. Actions against Errors
Error code
Error
Error description
information
Action
- An identical network No. is used for
3104
Parameter
No.
Ethernet, MELSECNET/H, and
- Correct and write network parameters.
MELSECNET/10.
- If an error occurs even after correction,
- Network No., Sta. No., or group No.
specified by parameter is out of valid range.
hardware failure is suspected. Contact
Mitsubishi Electric System Service; CO.,
- I/O No. is out of valid range of used CPU.
LTD. or a branch or a dealer of Mitsubishi
- Values of Ethernet- specific parameters
Electric Corporation for support.
are invalid.
- Delete CC- Link setting parameter of
On multiple PLC system, QJ61BT11 module
controlled by other machine is specified as
start I/O No. of CC- Link setting parameter
QJ61BT11 controlled by other machine.
- Change the parameter into start I/O No. of
QJ61BT11 module controlled by own
machine.
3105
Parameter
No.
- Although the No. of CC- Link utility was
specified as one or more, the actual No. of
- Correct and write network parameters.
mounted units is 0.
- If an error occurs even after correction,
- Start I/O No. of common parameter setting
is different from actual I/O No..
- Different station types are specified in the
module count setting parameter for
hardware failure is suspected. Contact
Mitsubishi Electric System Service; CO.,
LTD. or a branch or a dealer of Mitsubishi
Electric Corporation for support.
CC-Link.
3107
3300
Parameter
No.
Parameter
No.
- CC- Link parameters are faulty.
- The specified mode is not available for the
Review the setting of the parameter.
version of the mounted CC-Link utility.
The first I/O No. in the intelligent functional
module's parameter specified in GX
Check parameter settings.
Configurator is different from the actual one.
The refresh parameter of the intelligent
3301
Parameter
No.
function module is outside the range, or the
refresh range exceeded the file register
Check parameter settings.
capacity.
3302
248
Parameter
No.
Parameters of intelligent functional module
are faulty.
Check parameter settings.
PPC-CPU852(MS)-512