Download SENtral MandM Technical Datasheet_rG

Transcript
2 SENtral Specifications1
2.1 Performance Characteristics
Table 2-1: Performance Characteristics
Parameter
Minimum
Typical
Heading Accuracy
2
Output Data Rate
200
Maximum
Units
° rms
400
Hz
2.2 Electrical Characteristics
Table 2-2: Absolute Maximum Ratings
Parameter
Symbol
Minimum
Maximum
Units
Supply Voltage
VDD
-0.3
+3.6
VDC
Input Pin Voltage
VIN
GND – 0.3
VDD + 0.3
VDC
-50°
+150°
C
Storage Temperature
CAUTION:
Stresses beyond those listed above may cause permanent damage to the device. These
are stress ratings only. Operation of the device at these or other conditions beyond those
indicated in the operational sections of the specifications is not implied.
Footnote
1. Specifications subject to change.
PNI Sensor Corporation
SENtral M&M Technical Datasheet
Doc #1020129 revG
Page 6