Download USER MANUAL

6. MAINTENANCE
ATTENTION!

Always disconnect the power supply by switching the main switch to "0" or by
unplugging the power cord

Always disconnect the external pressure (if applicable)

Test the machine after maintenance or repairs, so it is certain that the machine
can be safely used

Only trained personnel should perform the described maintenance work
6.1. Maintenance diagram
Every 4 years
Yearly
Every 6 months
LUBRICANT
Weekly
ACTIVITY
Daily
The diagram below shows the maintenance activities that must be performed.
SECTION
Cleaning
Cleaning the machine
6.2
Lubrication
Lubricate the grease nipples of the parallel arms Bearing grease
2
Replace the oil of the vacuum pump
1
See chapter 1 for
oil type
Inspections
Check the oil level
2.3
Execute the oil cleaning program
6.3
Inspect the seal bars
6.6
Inspect the silicone rubber of the silicone holders
6.7
Inspect the lid seal
6.8
Check the plastic lid for cracks
(If applicable)
Inspect the lid springs. Pay special attention to
the fixing and any damage
6.9
USER MANUAL
Marlin / Falcon / Polar Version: MFP-EN-0 04-12-14
51