Download User`s Guide

You should clean the printer every six months (or after about
300 hours of operation).
4. Reinstall the pull-up roller assembly, and close the access
cover.
Note: Never use solvents or strong detergents on the
cabinet: they could damage the housing.
1. Turn the printer off, and remove any paper from the path.
2. Open the access cover, remove the pull-up roller assembly.
3. Use a clean, dry cloth to dust around the carriage shaft
and platen. Remove any loose pieces of paper.
Help Guide
3390hlp3.pm6
7
7
22/03/96, 16:05
English
Cleaning the Housing