Download Model 15i - User Manual
Transcript
About This Manual Safety ● Appendix C “MODBUS Protocol” provides a description of the MODBUS Protocol Interface and is supported both over RS-232/485 (RTU protocol) as well as TCP/IP over Ethernet. ● Appendix D “Geysitech (Bayern-Hessen) Protocol” provides a description of the Geysitech (Bayern-Hessen or BH) Protocol Interface and is supported both over RS-232/485 as well as TCP/IP over Ethernet. Safety Review the following safety information carefully before using the analyzer. This manual provides specific information on how to operate the analyzer, however, if the analyzer is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired. Safety and Equipment Damage Alerts This manual contains important information to alert you to potential safety hazards and risks of equipment damage. Refer to the following types of alerts you may see in this manual. Safety and Equipment Damage Alert Descriptions Alert Description DANGER A hazard is present that could result in death or serious personal injury if the warning is ignored. ▲ WARNING A hazard or unsafe practice could result in serious personal injury if the warning is ignored. ▲ CAUTION A hazard or unsafe practice could result in minor to moderate personal injury if the warning is ignored. ▲ Equipment Damage A hazard or unsafe practice could result in property damage if the warning is ignored. ▲ Safety and Equipment Damage Alerts in this Manual Alert Description WARNING The Model 15i is supplied with a three-wire grounded power cord. Under no circumstances should this grounding system be defeated. ▲ If the equipment is operated in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired. ▲ The service procedures in this manual are restricted to qualified service personnel only. ▲ ii Model 15i Instruction Manual Thermo Fisher Scientific