Download "service manual"

4 Connect the 2 wire connectors from the main cabinet to
the PTV Connector Panel. The signal connector has the
securing screws at the both ends. Fasten the 2 screws
tightly after having connected the connector. At this
time, use 3 persons to support the PTV.
Fasten the 2 screws tightly.
MITSUBISHI
PROJECTOR
Connect the 2 Connectors.
TOSHIBA
PROJECTOR
At this time, use 3 persons to
support the PTV.
FIG. 6. 3 c
Fasten the 2 screws tightly.
5 Fit the PTV to the main cabinet. Use care so as not to damage wiring at this time.
6 Secure the joining portion of the PTV and the main cabinet with a total of 4 screws.
FIG. 6. 3 d
PTV
www.seuservice.com
TRUSS SCREW (4 in total)
M5 X 40,chrome,
flat washer used.
22