Download Lotus Service Notes Section EMP

Transcript
Lotus Service Notes
Section EMP
Potential failure modes:
Sensor connector and wiring should be checked for corrosion and loose connections.
Notes:
• The MIL will be illuminated if the fault is present for 2 consecutive trips.
• Further information on the sensor may be found inToyota 1ZZ-FE, 2ZZ-GE manual RM733E (B120T0327J)
pages DI-53 to DI-62
Page 17
sn_emp_cyclone.indd 17
06/04/2005 15:45:30