Download - Oracle Documentation

7
Note – As metainit(1M) runs, you will see messages similar to the following:
metainit: hahost1/d10: WARNING: This form of metainit is
not recommended. The submirrors may not have the same data.
Please see ERRORS in metainit(1M) for additional
information. hahost1/d10: Mirror is setup.
These metainit(1M) error messages can be ignored safely.
13. Allow hasetup(1M) to create file systems on all metatrans devices.
Is it okay to create filesystem on all metatrans devices (yes/no) [yes]?
The hasetup(1M) command launches newfs on the metatrans devices and
generates status messages:
Launching "newfs" for
Launching "newfs" for
Launching "newfs" for
...
All "newfs" processes
hahost1/rdsk/d0 ... done
hahost1/rdsk/d1 ... done
hahost1/rdsk/d2 ... done
completed ... done
14. Allow hasetup(1M) to create new vfstab files.
You are prompted as to whether you want to create new vfstab files.
Do you want to create new Solstice HA vfstab files (yes/no) [yes]?
Would you like to use the default mount points (yes/no) [no]? yes
Mount point for metadevice d1 under /hahost1 (^D to skip) [d1]?
mount /dev/md/hahost1/dsk/d0 /hahost1... done
mount /dev/md/hahost1/dsk/d1 /hahost1/d1... done
Copying the "vfstab.hahost1" file to host "phys-hahost2" ... done
...
Software Configuration and Validation
7-13