Download - Plasmon

Printing History
Revision
Date
A
11/21/03
B
05/11/04
Many
Revision to encompass many changes and adding information
regarding Models 136, 144, 200, 208.
C
06/16/04
13,20
Removed reference/support for element address scheme 2.
D
06/23/04
Pages
Initial Release
13
Removed models and corrected to model 166 and 174.
34
Description added to make clear how op panel text is centered.
37
Reworded 10.8.1 to clarify the Number of Data Transfer Elements.
41
MO drive type changed from 0xE0 to 0x0E. A typing error.
41
UDO drive type changed from 0xE1 to 0x1E. A typing error.
41
Removed references to Mode Sense of op panel power button.
49
Added the location of MediaType to section 10.14.1
51
Added Except description to make more readable.
56
Documented additional sense bytes 84-127.
63
More description for Buffer ID=2 under Write Buffer Command.
Appendix
Table Of Contents
E
01/04/04
Descriptions
Added appendices combining developers guide into this Spec.
Added SCSI commands to TOC for easy referencing.
49
Reworded AvolTag section to be specific about media orientation.
18
Added more description to TypeSel field of Initialize Element
18
Added function for TypeSel=3 for firmware G01 or greater.
18
Changed the Initialize Element Status command for ScanMd.
19
Changed Sync=1 to =0 since unit does not support sync mode.
25
Text library recovery errors changed to library recovered errors.
26
Bytes 78-81 used for cum. Pick/put error recovery counts.
26
Rear and front fan bits were reversed so corrected description.
27
Added details to section 10.5.2, Error Statistics Page (31h).
28
Corrected 10.5.3 from page length of 1900h to 2000h.
29
Changed SCSI event history page 34h to 16K.
32, 33
Added ScanMd to the Mode Select Special Modes page 21h.
34
Changed AllowOff to PowerOff with new definition.
34
Changed PowerOff from bit 7 to bit 4 of byte 2, page 23h
39,40
Added ScanMd to the Mode Sense Special Modes page 21h.
42
Added four corners mode page, section 10.8.8
53
Added note to 10.14.4 to disallow reuse of byte 6, bit 7, NotBus.
63
Changed to “Overlapped Commands Attempted”
64
Revised 10.23.1 to be more correct.
67
Added error code 0x28 and 0x2C to Appendix A.
70
Added internal error codes 0x2E, 0x2F, 0x35.
97706346 Plasmon Gx Libraries SCSI Reference Manual
ii