Download 4.8 Frame Configuration Settings

IEEE 802.11n/IEEE 802.11ac
Remote-Control Commands
Frame Configuration Settings
Example:
BB:WLNN:FBL1:BFC:BINT 200ms
Sets the time intervall between two beacon transmissions to 200
ms.
Manual operation:
See "Beacon Interval" on page 51
[:SOURce<hw>]:BB:WLNN:FBLock<ch>:BFConfiguration:DCCHannel?
<DCCHannel>
Queries the current channel of the DSSS network.
Example:
BB:WLNN:FBL1:BFC:DCCH?
Usage:
Query only
Manual operation:
See "DSSS(Current Channel)" on page 52
[:SOURce<hw>]:BB:WLNN:FBLock<ch>:BFConfiguration:IAWindow <IAWindow>
Sets the parameters necessary to support an IBSS (2 bytes). The Information field
contains the ATIM Window parameter.
Parameters:
<IAWindow>
integer
Example:
BB:WLNN:FBL1:BFC:IAW #HFFFF,16
Manual operation:
See "IBSS(ATIM Window) (hex)" on page 52
[:SOURce<hw>]:BB:WLNN:FBLock<ch>:BFConfiguration:SRATe <SRATe>
Determines a set of data rates that are supported by the accesspoint (SupportedRates
field).
Parameters:
<SRATe>
integer
Example:
BB:WLNN:FBL1:BFC:SRAT #H06090C1218243036,64
Determines the following set of supported data rates: Hex numbers 06 09 0C 12 18 24 30 36.
This means: 6 Mbps, 9 Mbps, 12 Mbps, 18 Mbps, 24 Mbps, 36
Mbps, 48 Mbps and 54 Mbps are supported by the accesspoint.
Manual operation:
See "SupportedRate" on page 52
[:SOURce<hw>]:BB:WLNN:FBLock<ch>:BFConfiguration:SSID <Ssid>
Specifies the desired SSID or the wildcard SSID.
Parameters:
<Ssid>
string
Range:
Operating Manual 1171.5519.12 ─ 16
0 char to 32 char
148