Download Graco Catalogue
Transcript
PM5™ Electronic Pre-Set Meter Fluid Meters and Valves Features and Benefits • Automatic shut-off for hands-free operation • Dispenses in gallons, quarts, pints and liters • Rugged trigger guard protects meter from damage • Easy-to-replace 9-volt alkaline battery • Resettable total for periodic reporting • In-field calibration capability Typical Application 7 • Preset metered oil dispense • Automotive dealerships • Heavy duty dealerships • Fast lube centers • Fleet service facilities • Service shops • In-plant • For indoor use only Typical Fluids Handled • Petroleum and synthetic based oils 238511 shown • Anti-freeze Technical Specifications Flow Range* . . . . . . . . . . . . . . . . . . . . . . . . . . 0.26 to 5 gpm (1 to 18.9 lpm) Wetted Parts . . . . . zinc, SST #304, Zenite, CS, polyurethane, nitrile rubber Operating Pressure Range For gear lube units . . . . . . . 20 to 1000 psi (1.4 to 69 bar, 0.7 to 7 MPa) For motor oil units . . . . . . . . 45 to 1000 psi (3.1-69 bar, 0.29 to 7 MPa) Meter Valve Assembly Pressure Loss . . . . . . . . . . 17 psi (1.1 bar, 0.11 MPa) (@ 1.5 gpm [5.7 lpm] with 30 wt. oil @ 70ºF [21ºC]) Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 lb (1.36 kg) Repeatability**** . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±0.15% Units of Measurement . . . . . . . . . . . . . . . . . . . .factory-set in quarts or liters Maximum totalizer amount=99,999 gallons or liters Maximum recorded dispensed volume=999.99 units Maximum predetermined volume=99.999 units Dimensions (without extension) . . . . . . . . . . . . 14 in L x 3.75 in W x 3.1 H (35.6cm L x 9.5cm W x 7.9cm H) Inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2 npt Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/8 npt Operating Temperature Range . . . . . . . . . . . . . . . . 32 to 120ºF (0 to 49ºC) Storage Temperature Range . . . . . . . . . . . . . . . . -30 to 120ºF (-34 to 49ºC) Battery** . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-volt alkaline 86 Accuracy*** . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±0.5% Instruction Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 308735 * Tested in No. 10-weight motor oil. Flow rates vary with fluid pressure and viscosity. ** Battery required to meet safety approvals: Duracell MN 1604, or Panasonic 6AM6X *** At. 2.5 gpm (9.5 lpm), at 70ºF (21ºC), with 10 weight oil and 1 gal (3.8 l) dispensed. May require calibration; out-of-box accuracy is ±1.25% **** At 2.5 gpm (9.5 lpm), at 70ºF (21ºC), with 10 weight oil and 1 gal (3.8 l) dispensed Not recommended for in-line installation. L U B R I C AT I O N EQ U I P M E N T ❚ F L U I D M ET E R S A N D VA LV E S