Download Graco Catalogue

Transcript
PM5™ Electronic Pre-Set Meter
Fluid Meters and Valves
Features and Benefits
• Automatic shut-off for hands-free operation
• Dispenses in gallons, quarts, pints and liters
• Rugged trigger guard protects meter from damage
• Easy-to-replace 9-volt alkaline battery
• Resettable total for periodic reporting
• In-field calibration capability
Typical Application
7
• Preset metered oil dispense
• Automotive dealerships
• Heavy duty dealerships
• Fast lube centers
• Fleet service facilities
• Service shops
• In-plant
• For indoor use only
Typical Fluids Handled
• Petroleum and synthetic based oils
238511 shown
• Anti-freeze
Technical Specifications
Flow Range* . . . . . . . . . . . . . . . . . . . . . . . . . . 0.26 to 5 gpm (1 to 18.9 lpm)
Wetted Parts . . . . . zinc, SST #304, Zenite, CS, polyurethane, nitrile rubber
Operating Pressure Range
For gear lube units . . . . . . . 20 to 1000 psi (1.4 to 69 bar, 0.7 to 7 MPa)
For motor oil units . . . . . . . . 45 to 1000 psi (3.1-69 bar, 0.29 to 7 MPa)
Meter Valve Assembly Pressure Loss . . . . . . . . . . 17 psi (1.1 bar, 0.11 MPa)
(@ 1.5 gpm [5.7 lpm] with 30 wt. oil @ 70ºF [21ºC])
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 lb (1.36 kg)
Repeatability**** . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±0.15%
Units of Measurement . . . . . . . . . . . . . . . . . . . .factory-set in quarts or liters
Maximum totalizer amount=99,999 gallons or liters
Maximum recorded dispensed volume=999.99 units
Maximum predetermined volume=99.999 units
Dimensions (without extension) . . . . . . . . . . . . 14 in L x 3.75 in W x 3.1 H
(35.6cm L x 9.5cm W x 7.9cm H)
Inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2 npt
Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/8 npt
Operating Temperature Range . . . . . . . . . . . . . . . . 32 to 120ºF (0 to 49ºC)
Storage Temperature Range . . . . . . . . . . . . . . . . -30 to 120ºF (-34 to 49ºC)
Battery** . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-volt alkaline
86
Accuracy*** . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±0.5%
Instruction Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 308735
* Tested in No. 10-weight motor oil. Flow rates vary with fluid pressure and viscosity.
** Battery required to meet safety approvals: Duracell MN 1604, or Panasonic 6AM6X
*** At. 2.5 gpm (9.5 lpm), at 70ºF (21ºC), with 10 weight oil and 1 gal (3.8 l) dispensed.
May require calibration; out-of-box accuracy is ±1.25%
**** At 2.5 gpm (9.5 lpm), at 70ºF (21ºC), with 10 weight oil and 1 gal (3.8 l) dispensed
Not recommended for in-line installation.
L U B R I C AT I O N EQ U I P M E N T ❚ F L U I D M ET E R S A N D VA LV E S