Download AquaGem - TechnoMad

The AquaGem will display the battery level (BAT xx) as a percentage of the
total. If running on mains the display will always show 100. The battery level is
also checked during a sample measurement. (It should be noted that the ‘Bat’
symbol will only be displayed if the level is <10%).
On completion of the self-test the display will then read:
indicating that the instrument is in standby mode and that no module is
installed.
If a module is fitted and it has previously been calibrated on a blank sample
the display will read:
If a module is fitted, but requires blank (zero) calibration, the following display
will be shown:
(resolution and units are as defined by parameters stored on the module).
(8)