Download Scorpion Super Stinger

SERVICE MANUAL- 1975 SCORPION SUPER STINGER
RE-ASSEMBLY OF DRIVE CLUTCH
CAUTION:
If stationary has been removed,
assure that there is no grease on
either the shaft or sheave before reassembly.
n
Re-install idler bearing, snap ring, retainer and
spring. Place weight arms on movable sheave (after checking them for lubri cation) . Attach
retainers, checking to see that the small locating
hole in the bearing aligns with the detent on inner face of retainer. Install torque plug and
torque plug retainer. Install bell housing,
checking alignment with stub on torque plug
provided for this purpose. Place spring washer
and bell retainer bolt on next, assuring that the
bolt has bottomed out securely in proper alignment. Install clutch attaching bolt. Torque on both
bolts to 50 ft. lbs.
0
4-7